Precession of the Isolated Neutron Star PSR B1828-11

Stairs, Lyne & Shemar have found that arrival time residuals from PSR B1828-11 vary periodically with a period of 500 days. This behavior can be accounted for by precession of the radiopulsar, an interpretation that is reinforced by the detection of variations in its pulse profile on the same timescale. Here, we model the period residuals from PSR B1828-11 in terms of precession of a triaxial rigid body. We include two contributions to the residuals: (i) the geometric effect, which arises because the times at which the pulsar emission beam points toward the observer varies with precession phase; (ii) the spindown contribution, which arises from any dependence of the spindown torque acting on the pulsar on the angle between its spin and magnetic axes. We use the data to probe numerous properties of the pulsar, most notably its shape, and the dependence of its spindown torque on the angle between its spin and magnetic axes, for which we assume a sum of a spin-aligned component (with a weight 1-a) and a dipolar component perpendicular to the magnetic beam axis (weight a), rather than the vacuum dipole torque (a=1). We find that a variety of shapes are consistent with the residuals, with a slight statistical preference for a prolate star. Moreover, a range of torque possibilities fit the data equally well, with no strong preference for the vacuum model. In the case of a prolate star we find evidence for an angle-dependent spindown torque. Our results show that the combination of geometrical and spin-down effects associated with precession can account for the principal features of PSR B1828-11's timing behavior, without fine tuning of the parameters.Comment: 22 pages, 14 figures, submitted to MNRAS; added references, corrected typo

New formulations of the Hop-Constrained Minimum Spanning Tree problem via Miller–Tucker–Zemlin constraints

Cataloged from PDF version of article.Given an undirected network with positive edge costs and a natural number p, the Hop-Constrained Minimum Spanning Tree problem (HMST) is the problem of finding a spanning tree with minimum total cost such that each path starting from a specified root node has no more than p hops (edges). In this paper, we develop new formulations for HMST. The formulations are based on Miller–Tucker–Zemlin (MTZ) subtour elimination constraints, MTZ-based liftings in the literature offered for HMST, and a new set of topologyenforcing constraints. We also compare the proposed models with the MTZ-based models in the literature with respect to linear programming relaxation bounds and solution times. The results indicate that the new models give considerably better bounds and solution times than their counterparts in the literature and that the new set of constraints is competitive with liftings to MTZ constraints, some of which are based on well-known, strong liftings of Desrochers and Laporte (1991). 2011 Elsevier B.V. All rights reserved

Optimization of transportation requirements in the deployment of military units

Cataloged from PDF version of article.We study the deployment planning problem (DPP) that may roughly be defined as the problem of the planning of the physical movement of military units, stationed at geographically dispersed locations, from their home bases to their designated destinations while obeying constraints on scheduling and routing issues as well as on the availability and use of various types of transportation assets that operate on a multimodal transportation network. The DPP is a large-scale real-world problem for which analytical models do not exist.We propose a model for solving the problem and develop a solution methodology which involves an effective use of relaxation and restriction that significantly speeds up a CPLEX-based branch-and-bound. The solution times for intermediate-sized problems are around 1 h at maximum, whereas it takes about a week in the Turkish Armed Forces to produce a suboptimal feasible solution based on trial-and-error methods. The proposed model can be used to evaluate and assess investment decisions in transportation infrastructure and transportation assets as well as to plan and execute cost-effective deployment operations at different levels of planning. 2005 Elsevier Ltd. All rights reserved

Measurements of the Rate Capability of Various Resistive Plate Chambers

Resistive Plate Chambers (RPCs) exhibit a significant loss of efficiency for the detection of particles, when subjected to high particle fluxes. This rate limitation is related to the usually high resistivity of the resistive plates used in their construction. This paper reports on measurements of the performance of three different glass RPC designs featuring a different total resistance of the resistive plates. The measurements were performed with 120 GeV protons at varying beam intensitie

Pulsed Beam Tests at the SANAEM RFQ Beamline

A proton beamline consisting of an inductively coupled plasma (ICP) source, two solenoid magnets, two steerer magnets and a radio frequency quadrupole (RFQ) is developed at the Turkish Atomic Energy Authority's (TAEA) Saraykoy Nuclear Research and Training Center (SNRTC-SANAEM) in Ankara. In Q4 of 2016, the RFQ was installed in the beamline. The high power tests of the RF power supply and the RF transmission line were done successfully. The high power RF conditioning of the RFQ was performed recently. The 13.56 MHz ICP source was tested in two different conditions, CW and pulsed. The characterization of the proton beam was done with ACCTs, Faraday cups and a pepper-pot emittance meter. Beam transverse emittance was measured in between the two solenoids of the LEBT. The measured beam is then reconstructed at the entrance of the RFQ by using computer simulations to determine the optimum solenoid currents for acceptance matching of the beam. This paper will introduce the pulsed beam test results at the SANAEM RFQ beamline. In addition, the high power RF conditioning of the RFQ will be discussed.Comment: 6 pages, 6 figures. Proceedings of the International Particle Accelerator Conference 2017 (IPAC'17), May 14-19, 2017, TUPAB015, p. 134

Are Cellulose nanocrystals ‘alien particles’ to human experience?

A wide family of cellulose-based additives are authorized worldwide as fillers and thickening agents in foods, pills and tablets, and microcrystalline cellulose (MCC) is, among these, the most important one. Since MCC manufacturing is similar to the main production route of cellulose nanocrystals (CNCs), it is reasonable to wonder whether the MCC would contain CNCs as minor components. In this Short Communications we provide first results about the occurrence of CNCs in MCC, observed by dynamic light scattering and transmission electron microscopy after serial filtrations of MCC suspensions. The incidence of cellulose nanoparticles has been proved in several different trials in our ongoing works on diverse MCC samples and the nanoparticles isolated showed shape and dimensions similar to those commonly produced by acidic hydrolysis at laboratory level. Therefore, the presence of CNCs in many products is considered as a certainty. The foods and the pharmaceuticals we have been consuming so far, do indeed contain traces of CNCs to such an extent that this wide presence in consumed products should be taken into account when considering possible limitations of the use of these nanoparticles in food contact materials manufacture

Metal-semiconductor-metal ultraviolet photodetectors based on gallium nitride grown by atomic layer deposition at low temperatures

Cataloged from PDF version of article.Proof-of-concept, first metal-semiconductor-metal ultraviolet photodetectors based on nanocrystalline gallium nitride (GaN) layers grown by low-temperature hollow-cathode plasma-assisted atomic layer deposition are demonstrated. Electrical and optical characteristics of the fabricated devices are investigated. Dark current values as low as 14 pA at a 30 V reverse bias are obtained. Fabricated devices exhibit a 15× UV/VIS rejection ratio based on photoresponsivity values at 200 nm (UV) and 390 nm (VIS) wavelengths. These devices can offer a promising alternative for flexible optoelectronics and the complementary metal oxide semiconductor integration of such devices. © 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)

EHPBS: Energy harvesting prediction based scheduling in wireless sensor networks

The clustering algorithms designed for traditional sensor networks have been adapted for energy harvesting sensor networks (EHWSN). However, in these algorithms, the intra-cluster MAC protocols to be used were either not defined at all or they were TDMA based. These TDMA based MAC protocols are not specified except for the fact that cluster heads assign time slots to their members in a random manner. In this paper, we will modify this TDMA based scheduling as follows: members will request a time slot depending on their energy prediction and the cluster heads will assign these slots to members. This method will increase the network lifetime. The proof will be given with simulations. © 2013 IEEE

Project PROMETHEUS: Design and Construction of a Radio Frequency Quadrupole at TAEK

The PROMETHEUS Project is ongoing for the design and development of a 4-vane radio frequency quadrupole (RFQ) together with its H+ ion source, a low energy beam transport (LEBT) line and diagnostics section. The main goal of the project is to achieve the acceleration of the low energy ions up to 1.5 MeV by an RFQ (352 MHz) shorter than 2 meter. A plasma ion source is being developed to produce a 20 keV, 1 mA H+ beam. Simulation results for ion source, transmission and beam dynamics are presented together with analytical studies performed with newly developed RFQ design code DEMIRCI. Simulation results shows that a beam transmission 99% could be achieved at 1.7 m downstream reaching an energy of 1.5 MeV. As the first phase an Aluminum RFQ prototype, the so-called cold model, will be built for low power RF characterization. In this contribution the status of the project, design considerations, simulation results, the various diagnostics techniques and RFQ manufacturing issues are discussed.Comment: 4 pages, 8 figures, Proceedings of the 2nd International Beam Instrumentation Conference 2013 (IBIC'13), 16-19 Sep 2013, WEPC02, p. 65